Page 1 of 1

Home made bonsai tools

Posted: November 29th, 2009, 3:19 pm
by Petra
Hi all,
This topic is for sharing the idea and use of your homemade handy tools for easier solutions to the techniques used in bonsai.
Im interested in what home made tools or other implements others have made, and how they use them.There has been tools shown in other posts for bending and such, could you show how they were made and demonstrate how they are used, here. Thanks for any help!

Re: Home made bonsai tools

Posted: November 29th, 2009, 3:42 pm
by Jarrod
I hve an old screw driver that was heated and bent over and ground to a point to create a root hook. That's he only one at the moment.

Re: Home made bonsai tools

Posted: November 29th, 2009, 4:15 pm
by anttal63
i would be lost without my scribe. i use it when wiring pines and others, to push foliage out of the way. i now also use it for all my root teasing out and combing through. for those who dont know what a scribe is?

Re: Home made bonsai tools

Posted: November 29th, 2009, 6:14 pm
by Pup
Bending Jacks, root hook and a root sickle for cutting the roots, when re potting very helpful with pots that have inverted tops.

I have these in 3 sizes for large trees down to Mame. Oh! and a rake made from a bent fork.

A mate has soil scoops made from plastic drink containers. I also use a plasterers small tool for scraping moss off and for tamping down the soil.Wooden wedges for tilting the angle of the pot.

Thought I had better show them.
P1080174.JPG

Re: Home made bonsai tools

Posted: November 29th, 2009, 6:52 pm
by Jamie
they're a couple of sweet trunk/branch benders pup :D are they made out of half inch round bar???


jamie :D

Re: Home made bonsai tools

Posted: November 29th, 2009, 11:08 pm
by Pup
jamie111 wrote:they're a couple of sweet trunk/branch benders pup :D are they made out of half inch round bar???


jamie :D
6mm bar will break a broom handle, you just need to be that strong your self, :lol: they are designed on a Japanese one I saw in an early magazine.

Cheers ;) Pup,
In one of the Bonsai europe mags there is an intersting design by a Frenchman on a tilting turntable,
Thought about it copied the pictures as well just never bothered.

Re: Home made bonsai tools

Posted: November 29th, 2009, 11:27 pm
by Jamie
:lol: okk half inch mught be a bit of an overkill, i have just found quarter inch to be a bit bendy, but i guess that comes from working with heavy steel too, i didnt think much about the fact we are trying to bend bonsai not full sized trees :lol: :oops: :lol:

half inch it is :D i will be knocking one up myself this week some time :D


jamie :D