[360°] Ficus obliqua (Queensland Small Leaf Fig)
- Tony Bebb
- Aussie Bonsai Fan
- Posts: 664
- Joined: November 25th, 2008, 10:42 pm
- Favorite Species: Conifers/Pines
- Bonsai Age: 28
- Bonsai Club: Bonsai Society of Queensland Inc.
- Location: Brisbane
- Been thanked: 5 times
- Contact:
Re: [360°] Ficus obliqua (Queensland Small Leaf Fig)
Hi Steven
Nice tree. I remember it from the dinner and it was a good score.
Some good advice given. I reckon all your problems would be solved if you moved the 1st right branch to just above the 1st left branch Easy fixed.
But seriously, it seems a little symetrical. At the very least I would contemplate shortening the 1st left branch by about 1/3 to give more direction back to the left as the trunk goes. If you could bring some foliage from the back branches around into the space above that branch it would fill it out a little also.
Nice garden too
Tony
Nice tree. I remember it from the dinner and it was a good score.
Some good advice given. I reckon all your problems would be solved if you moved the 1st right branch to just above the 1st left branch Easy fixed.
But seriously, it seems a little symetrical. At the very least I would contemplate shortening the 1st left branch by about 1/3 to give more direction back to the left as the trunk goes. If you could bring some foliage from the back branches around into the space above that branch it would fill it out a little also.
Nice garden too
Tony
Imagination is more important than knowledge - Albert Einstein
Click here to visit my Blog - A Bonsai Journey
Click here to visit my Blog - A Bonsai Journey
- MattA
- Banned
- Posts: 3112
- Joined: February 13th, 2010, 2:37 pm
- Favorite Species: Lichen
- Bonsai Age: 26
- Bonsai Club: Killing Trees Inc..
- Location: Lower Hunter Valley
- Been thanked: 1 time
- Contact:
Re: [360°] Ficus obliqua (Queensland Small Leaf Fig)
Not silly at all.... thats successful bonsaiAsh wrote:Yes Yes I know that sounds silly I mean big big not bonsai bigMattA wrote:Ash it IS a BIG tree
Tony, the tree is very symmetrical yet when viewed in person it doesnt feel/look wrong.
Matt
42 Mice ~Imperfection
"Experience is a hard teacher because she gives the test first, the lesson afterwards." ~ Vernon Sanders Law
"All the knowledge I possess everyone else can acquire, but my heart is all my own." ~ Johann Wolfgang Von Goeth
"Bonsai becomes great when growers start trees they know they will never see in a pot"
"Experience is a hard teacher because she gives the test first, the lesson afterwards." ~ Vernon Sanders Law
"All the knowledge I possess everyone else can acquire, but my heart is all my own." ~ Johann Wolfgang Von Goeth
"Bonsai becomes great when growers start trees they know they will never see in a pot"
-
- Aussie Bonsai Fan
- Posts: 161
- Joined: June 23rd, 2009, 10:26 am
- Favorite Species: Ficus
- Bonsai Age: 8
- Bonsai Club: Sakura Studio & B.F.A
- Location: Narrabeen
- Been thanked: 1 time
- Contact:
Re: [360°] Ficus obliqua (Queensland Small Leaf Fig)
Hi Steven
Removed the top and bottom left hand branch, trimmed and changed the angle of the other branches.
Just to see what it would look like.
Barry
Removed the top and bottom left hand branch, trimmed and changed the angle of the other branches.
Just to see what it would look like.
Barry
You do not have the required permissions to view the files attached to this post.
-
- Aussie Bonsai Fan
- Posts: 1904
- Joined: January 12th, 2010, 12:02 pm
- Favorite Species: many
- Bonsai Age: 25
- Bonsai Club: yarra valley
- Location: vic
- Been thanked: 1 time
Re: [360°] Ficus obliqua (Queensland Small Leaf Fig)
I like the branches as they are and think the slight upwards sweep is good, all I would do is wire it from top to bottom and as you said Steven spread out the crown a bit so the top half of the tree becomes one mass of twigs.
Craigw
Craigw
-
- Aussie Bonsai Fan
- Posts: 161
- Joined: June 23rd, 2009, 10:26 am
- Favorite Species: Ficus
- Bonsai Age: 8
- Bonsai Club: Sakura Studio & B.F.A
- Location: Narrabeen
- Been thanked: 1 time
- Contact:
Re: [360°] Ficus obliqua (Queensland Small Leaf Fig)
Hi Steven
A change of angle 15 degrees to the right gives a bigger root base and to me seems to improve the lower right hand branch.
Barry
A change of angle 15 degrees to the right gives a bigger root base and to me seems to improve the lower right hand branch.
Barry
You do not have the required permissions to view the files attached to this post.
- Steven
- Site Admin
- Posts: 3408
- Joined: November 7th, 2008, 11:21 am
- Favorite Species: [color=green]Casuarina[/color]
- Bonsai Age: 15
- Bonsai Club: AusBonsai & The School of Bonsai
- Location: Sydney
- Has thanked: 43 times
- Been thanked: 60 times
- Contact:
Re: [360°] Ficus obliqua (Queensland Small Leaf Fig)
Sorry Barry, I missed your virts when you posted them. Thanks mate!
I still haven't done any work to this tree since the defoliation in December. It just sits there and the more I look at it the more content I am with the current shape. The comments about lowering the branches are valid however they are about as thick as my wrist so it would be a difficult bend.
Here is a shot of how it is looking today;
I think I will edit the apex a bit to spread the branches and see how that goes.
Regards,
Steven
I still haven't done any work to this tree since the defoliation in December. It just sits there and the more I look at it the more content I am with the current shape. The comments about lowering the branches are valid however they are about as thick as my wrist so it would be a difficult bend.
Here is a shot of how it is looking today;
I think I will edit the apex a bit to spread the branches and see how that goes.
Regards,
Steven
You do not have the required permissions to view the files attached to this post.
- Steven
- Site Admin
- Posts: 3408
- Joined: November 7th, 2008, 11:21 am
- Favorite Species: [color=green]Casuarina[/color]
- Bonsai Age: 15
- Bonsai Club: AusBonsai & The School of Bonsai
- Location: Sydney
- Has thanked: 43 times
- Been thanked: 60 times
- Contact:
Re: [360°] Ficus obliqua (Queensland Small Leaf Fig)
G'day,
Nothing much had happened to this obliqua other than trimming for shape. It was suggested to me by Jonden and Lee Wilson during a trip to my garden that the tree could be rotated anticlockwise about 20° and have the bottom left branch removed. This would give it the widest possible base and a pleasing canopy. The following picture is the 'front' that John and Lee proposed;
I contemplated this idea for about 6 weeks but in the end decided against it... for now... I can always restyle and remove that branch later but I can't put it back on
I've tried to create a natural looking ficus and worked with the existing front. Due to the upwards growth of the branches, the tree always looked a bit too young for the sizable trunk. Over a few nights I have wired most branches and put on over 40 guy wires to pull branches down. To stop the guy wires cutting in to the bark I have slipped fish tank air tube over the wire where it touches the bark.
The apex always looked too small, pointy and a bit like a pompom so this was widened and lowered considerably to join the lower branches. It now forms a wider and more mature canopy. Following is how the tree was looking late last year;
And this is how it looks today;
If your interested, here is the link to this tree in 360°. I'll get another one put together in the future of how it is now looking.
As always, your feedback and constructive criticism is more than welcome.
Regards,
Steven
Nothing much had happened to this obliqua other than trimming for shape. It was suggested to me by Jonden and Lee Wilson during a trip to my garden that the tree could be rotated anticlockwise about 20° and have the bottom left branch removed. This would give it the widest possible base and a pleasing canopy. The following picture is the 'front' that John and Lee proposed;
I contemplated this idea for about 6 weeks but in the end decided against it... for now... I can always restyle and remove that branch later but I can't put it back on
I've tried to create a natural looking ficus and worked with the existing front. Due to the upwards growth of the branches, the tree always looked a bit too young for the sizable trunk. Over a few nights I have wired most branches and put on over 40 guy wires to pull branches down. To stop the guy wires cutting in to the bark I have slipped fish tank air tube over the wire where it touches the bark.
The apex always looked too small, pointy and a bit like a pompom so this was widened and lowered considerably to join the lower branches. It now forms a wider and more mature canopy. Following is how the tree was looking late last year;
And this is how it looks today;
If your interested, here is the link to this tree in 360°. I'll get another one put together in the future of how it is now looking.
As always, your feedback and constructive criticism is more than welcome.
Regards,
Steven
You do not have the required permissions to view the files attached to this post.
-
- Aussie Bonsai Fan
- Posts: 320
- Joined: February 15th, 2009, 1:26 am
- Favorite Species: Ficus
- Bonsai Age: 30
- Location: Montana, USA
- Contact:
Re: [360°] Ficus obliqua (Queensland Small Leaf Fig)
Steven,
I like it.
Good work.
Jerry
I like it.
Good work.
Jerry
http://www.bonsaihunk.us" onclick="window.open(this.href);return false;
- Ray M
- Aussie Bonsai Fan
- Posts: 1403
- Joined: November 5th, 2009, 3:36 pm
- Favorite Species: Figs, Junipers, Maples, Elms, Pines, Banksias
- Bonsai Age: 31
- Bonsai Club: The School of Bonsai
- Location: Winston Hills NSW
- Been thanked: 15 times
Re: [360°] Ficus obliqua (Queensland Small Leaf Fig)
Hi Steven,
Your last photo looks great. It has been my belief that the bottom branches should come down. It now looks a lot more like an old fig tree.
Great work.
Regards Ray
Your last photo looks great. It has been my belief that the bottom branches should come down. It now looks a lot more like an old fig tree.
Great work.
Regards Ray
-
- Aussie Bonsai Fan
- Posts: 145
- Joined: November 15th, 2011, 9:09 am
- Favorite Species: Ficus-Elm
- Bonsai Age: 10
- Location: Sydney
- Contact:
Re: [360°] Ficus obliqua (Queensland Small Leaf Fig)
I really like it the pot complements the trunk beautifully. The more I look at it and sit back the tree is more and more appealing.
Anyone should be proud to have that tree in there collection
Thanks for posting
Regards
Mick
Anyone should be proud to have that tree in there collection
Thanks for posting
Regards
Mick
So many Bonsai ......So little time between work hours and wife!
-
- Aussie Bonsai Fan
- Posts: 1386
- Joined: November 27th, 2008, 12:37 pm
- Favorite Species: Pine, Maple, and Juniper
- Bonsai Age: 8
- Bonsai Club: Canberra Bonsai Society
- Location: Canberra
- Has thanked: 17 times
- Been thanked: 13 times
- Contact:
Re: [360°] Ficus obliqua (Queensland Small Leaf Fig)
Good decision to keep that branch, I don't love the 'gap', but I do like the post wiring pic, it reminds me of an old Gum.
- Steven
- Site Admin
- Posts: 3408
- Joined: November 7th, 2008, 11:21 am
- Favorite Species: [color=green]Casuarina[/color]
- Bonsai Age: 15
- Bonsai Club: AusBonsai & The School of Bonsai
- Location: Sydney
- Has thanked: 43 times
- Been thanked: 60 times
- Contact:
Re: [360°] Ficus obliqua (Queensland Small Leaf Fig)
Thanks for the feedback gentlemen
Regards,
Steven
Sorry Scott, what 'gap' don't you like?Scott Roxburgh wrote:I don't love the 'gap', but I do like the post wiring pic, it reminds me of an old Gum.
Regards,
Steven
- Bretts
- Bonsai Philosopher
- Posts: 6670
- Joined: November 14th, 2008, 11:04 pm
- Favorite Species: carpinus jbp
- Bonsai Age: 12
- Location: Jervis Bay NSW
- Has thanked: 1 time
- Contact:
Re: [360°] Ficus obliqua (Queensland Small Leaf Fig)
Shilloett is much much better. The only problem I see now is the direction of the two branches on the right clash a little too much.
I would pull down the front branch to set a pattern with the upper right branch to start with and then if it still looks out of place I would look at way's to lower the first right branch.
Nothing is impossible
I see there is a secondary branch at the front of the first right branch. Put a little wire on that and flatten it out and that could help!
I would pull down the front branch to set a pattern with the upper right branch to start with and then if it still looks out of place I would look at way's to lower the first right branch.
Nothing is impossible
I see there is a secondary branch at the front of the first right branch. Put a little wire on that and flatten it out and that could help!
Last edited by Bretts on February 9th, 2012, 4:56 pm, edited 1 time in total.
It's too bad your in such a hurry cause the stories I could tell you, Bushels and baskets of stories, hole crates full of stories. But if you can spare a moment I will tell you one story.
- Ash
- Aussie Bonsai Fan
- Posts: 720
- Joined: April 22nd, 2009, 10:23 am
- Favorite Species: Ficus
- Bonsai Age: 25
- Bonsai Club: ausbonsai
- Location: North Queensland
- Has thanked: 4 times
- Been thanked: 10 times
- Contact:
Re: [360°] Ficus obliqua (Queensland Small Leaf Fig)
Hi Steven, Looks great. I love the current front, has taper and gentle shape and the branch positions are well balanced. I am not so keen on the alternative shown above that would require a branch to be removed, the widest base aint everything, I think the only reason we go for thick is to look stable and this tree looks stable already. Looks great. Time for another shot in the garden.
cheers
Ash
cheers
Ash